|
Post by hotrod1935 on May 16, 2015 9:04:34 GMT
well, I have just taken my usual two weeks off to get some more paint by numbers done and get ready for billing, all was well till yesterday . while fixing a exhaust leak at the manifold it broke in two when removed !!! see images, as this is about the only part I don't have spares of. it kinda blows me out the water for billing & the rest of the season unless one comes up on e bay none on at the moment, took it to andy 351 to try and weld NO Go. its need to be the same type of essex manifold to match the exhaust system I made for it. later Granada, poss scimitar!! joys of hotrodding deano
|
|
|
Post by capriconsul on May 16, 2015 10:13:44 GMT
Got a pair off the capri but there not cast your more than welcome to have if you can adapt they are the tubular ones with the long sweep if you know which type o mean
|
|
|
Post by hotrod1935 on May 16, 2015 12:28:38 GMT
hi thanks, not sure it will fit between chassis, need neaR side , but I could try, aRE YOU GOINT TO DONNY OR BREAKFAST MEET TOMMOROW ? DEANO
|
|
|
Post by capriconsul on May 16, 2015 13:39:14 GMT
I'm at breakfast meet tomorrow I'll bring them your wellcome to have them mate clears a bit off space for me I'll see if I've got anything else that might help I'm all stainless now will never use them worth a go though you never know
|
|
|
Post by capriconsul on May 16, 2015 14:05:56 GMT
Any good I'll put them both in car Attachments:
|
|
|
Post by hotrod1935 on May 16, 2015 14:37:21 GMT
hi up to you if you want rid of lot, thanks need only n/side to get me out of jail, shame the cast ones aren't the same its one like the off side I need see you tomorrow cheers deano
|
|
DCoupe
Full NHRC Member
Posts: 75
|
Post by DCoupe on May 16, 2015 17:46:45 GMT
Drama Queen just take em all off straight thru2inch sorted
DC
|
|
|
Post by hotrod1935 on May 17, 2015 18:29:28 GMT
drama queen HUH!LOL so with the best intensions and help from fellow rodders , mick , mick and nigel, I have failed and none of the manifolds will fit nor can I adapt them too fit, so we wait for one to appear on e bay, or see what can be done @ 351 by andy when and if. plan B may have to be put into action for billing now deano
|
|
Russ D
Full NHRC Member
Site Cleaner & General Baffoon.
The 70's! It's the future.
Posts: 2,235
Signature: The 70's is tha future!
|
Post by Russ D on May 17, 2015 20:09:27 GMT
Cortina for Billing Deano?
|
|
Starlyte
Full NHRC Member
Starting again after 30yrs
Posts: 662
|
Post by Starlyte on May 18, 2015 9:31:19 GMT
|
|
|
Post by hotrod1935 on May 18, 2015 17:25:38 GMT
hi thanks john for the links & thought , but they are no good as my engine is the Essex v6 not colone or 2.8 2.9 may be russ, 2 nd reserve,
|
|
32sedan
Addicted
Moderator
Posts: 503
Signature: Stopping at a petrol station near you soon.
|
Post by 32sedan on May 21, 2015 6:26:41 GMT
How about calling over on Saturday and we can try to weld/braze them? got to be worth a try.
|
|
Chris123
Full NHRC Member
Posts: 176
Signature: Silence!!!
|
Post by Chris123 on May 21, 2015 18:40:33 GMT
Have you tryed granada owners club
|
|
Chris123
Full NHRC Member
Posts: 176
Signature: Silence!!!
|
Post by Chris123 on May 21, 2015 18:51:51 GMT
Google preloved v6 engine there some stuff on there mate
|
|
|
Post by hotrod1935 on May 21, 2015 19:05:39 GMT
cheers chris, tried pre loved, nothing on there , am trying granada , capri specialists but no luck at the moment deano
|
|