Russ D
Full NHRC Member
Site Cleaner & General Baffoon.
The 70's! It's the future.
Posts: 2,235
Signature: The 70's is tha future!
|
Post by Russ D on Sept 17, 2016 16:17:14 GMT
|
|
Russ D
Full NHRC Member
Site Cleaner & General Baffoon.
The 70's! It's the future.
Posts: 2,235
Signature: The 70's is tha future!
|
Post by Russ D on Sept 20, 2016 18:19:39 GMT
Its Tuesday!! Bit of gas axe action. Goal was to finally split the old chassis away and mount the body on the new one. So in place it went... D applied the "simpleton" look and we got the two post ramp on place, Shaun welded up the doors and braced the body.... Axed the final bits where the grinder wouldnt go..,, And up she went.... Out with the old... In with the new.... Bit of adjustment.... And shes on. Body tacked on. That right there was a good old two hours!!! And she rolls. So Saturday we weldy weldy sticky buildy uppy!
|
|
32sedan
Addicted
Moderator
Posts: 503
Signature: Stopping at a petrol station near you soon.
|
Post by 32sedan on Sept 21, 2016 6:23:45 GMT
"Life is like a box of chocolates"
|
|
Starlyte
Full NHRC Member
Starting again after 30yrs
Posts: 662
|
Post by Starlyte on Oct 1, 2016 15:37:13 GMT
No messing around there.
|
|
Russ D
Full NHRC Member
Site Cleaner & General Baffoon.
The 70's! It's the future.
Posts: 2,235
Signature: The 70's is tha future!
|
Post by Russ D on Oct 1, 2016 19:48:07 GMT
But ya never know what ta gonna geet!
|
|
Russ D
Full NHRC Member
Site Cleaner & General Baffoon.
The 70's! It's the future.
Posts: 2,235
Signature: The 70's is tha future!
|
Post by Russ D on Oct 6, 2016 14:29:36 GMT
Stance!
|
|
Starlyte
Full NHRC Member
Starting again after 30yrs
Posts: 662
|
Post by Starlyte on Oct 7, 2016 16:18:50 GMT
Whats the new chassis
|
|
32sedan
Addicted
Moderator
Posts: 503
Signature: Stopping at a petrol station near you soon.
|
Post by 32sedan on Oct 8, 2016 20:48:16 GMT
Just some box section i got of our favourite auction site a few months back. Nearly got the engine running today but the starter motor fell in pieces so thats that till tuesday. Gonna get the engine running so i know its ok then chassis outriggers and a floor welded in for end of saturday.
|
|